Unit 1304-3,Buiding 59,Phase III,Xiamen Software Pack Xiamen,China     admin@yumisteel.com      +86-592-6095031

Product Category

loading

Share to:
sharethis sharing button

Galvanized Corrugated Steel Deck Sheets for Concrete Slab

YX51-250-750 is one kind of bondek sheets for multiple high-rise buildings,which is also called steel floor decking or bondek slab.Our quality composite decking sheets have full set of technical support.
Availability:
Quantity:
  • YX51-250-750

  • Yumi steel

  • 72104900

1. Steel deck overview:

Floor decking sheets is also known as profiled steel deck,metal deck,roof decking, etc.The earliest name of bondek is called corrugated steel deck,and all steel floor decking sheets that are pressed and formed by a platen press and are collectively referred to.The floor slab is made from galvanized steel sheet by cold roll forming,and its cross section is V-shaped, U-shaped, trapezoidal or the like. It is mainly used as a permanent template and can also be selected for other purposes.The earliest compacted steel decking sheets were mainly used as roof panels of factory roof,followed by profiled steel plates used for the floors and gradually classified as floor decking sheets.YX51-250-750 is one kind of typical Composite floor deck,here we will introduce more about this model.


2. Product specification&Sectional properties:


Thickness
(mm)

Weight
(KG/M²)

I(cm4/m)

I(cm3/m)

0.75

8.37

47.67

23.19

1.00

10.47

59.56

28.59

1.20

12.56

71.44

34.51


3. Roof deck material standards:

The material of floor decking sheets is hot-dipped zinc-coated (galvanized) structural steel sheet with a spangled surface.Here we offer one standard list for your reference.For zinc coating,we could make from 120 g/m² to 450 g/m².

Steel standards

Yield Strength(MPa)

Tensile strength (N/mm²)

Q235

≥235

215

Q345

≥345

300

G500

≥500

520

G550

≥550

550

4. Application of Deck system:

Steel decking system is popularly used in all multi-rise buildings,like financial center,office high rise building,exhibition hall,theaters,etc.


5. Features of composite decks :

1, Opened type floor decking sheets can meet the requirements of rapid construction of the main steel structure, and can provide a firm working platform in a short time. The pressure type steel plate can be laid on the multi-layer floor, and the concrete slab can be poured by layering;

2,In the using stage, the floor is used as the tensile rib of the concrete floor, which also increases the rigidity of the floor and saves the amount of steel and concrete;

3,The decking sheets pressing mode maximizes the bonding force between the bottom plate and the concrete, and makes the two form a whole, reinforcing ribs, so that the bearing plate system has a high bearing capacity;

4,Under cantilever conditions, the floor is only used as a permanent template. The length of the cantilever can be determined according to the cross-sectional characteristics of the floor. In order to prevent the cantilever plate from cracking, the negative reinforcement should be installed at the support point according to the design of the structural engineer.


6. Span tables for reference:





Deflection Limited = L/130

Span type

Composite weight(kg/m²)


Single spans(mm)


Two spans(mm)


Three spans(mm)


Slab THK(mm)

Bondek THK(mm)

100



0.75

179.86

2140

2400

2470

1.00

183.58

2260

2560

2630

1.20

184.30

2330

2730

2740

110



0.75

198.74

2100

2350

2440

1.00

201.74

2200

2520

2570

1.20

203.65

2290

2680

2690

120



0.75

219.60

2040

2310

2400

1.00

221.69

2150

2470

2530

1.20

223.79

2240

2630

2640

130



0.75

244.60

1980

2260

2330

1.00

246.69

2090

2420

2460

1.20

248.79

2180

2580

2570

140



0.75

269.60

1930

2220

2280

1.00

271.69

2040

2380

2400

1.20

273.79

2130

2530

2510

150



0.75

294.60

1890

2180

2230

1.00

296.69

2000

2340

2350

1.20

298.79

2090

2480

2460

Note:This data is for model YX51-250-750 and based on Chinese steel standards Q345.If you have any other steel standards span data needed,please contact us,thank you.

7. Bondek loading VS. Concrete strength grade:

Strength grade of concrete

Floor height(mm)

Thickness of Bondek(mm)

Mr(KNm)

Strength grade of concrete

Floor height(mm)

Thickness of Bondek(mm)

Mr(KNm)

C25


















100



0.75

22.35

C30


















100



0.75

23.07

1.00

26.61

1.00

27.73

1.20

30.34

1.20

31.95

110



0.75

25.12

110



0.75

25.92

1.00

29.90

1.00

31.16

1.20

34.09

1.20

35.89

120



0.75

28.22

120



0.75

29.12

1.00

33.60

1.00

35.01

1.20

38.30

1.20

40.33

130



0.75

31.42

130



0.75

32.32

1.00

37.60

1.00

39.01

1.20

43.10

1.20

45.13

140



0.75

34.62

140



0.75

35.52

1.00

41.30

1.00

43.01

1.20

47.90

1.20

49.93

150



0.75

37.82

150



0.75

38.72

1.00

45.60

1.00

47.04

1.20

52.70

1.20

54.73

Note:This data is for model YX51-250-750 and based on Chinese steel standards Q345.If you have any other steel standards data needed,please contact us,thank you.

8. Installation notes:

1.Before installation,ask for floor decking sheet to be completed and delivered in order,according to project plan.All the bondeck sheets need to be transported in batches to the site,and arranged in order,suspended at the bottom and placed on the main beam. Blocks are laid and used manually from near to far to ensure continuous straight and overlapping engagement.

2,After quality inspection, when the main beam of this layer is installed correctly, it can be hoisted into the floor.The command is to hang the corrugated steel deck to the designated location,and lay the decking sheets,and install the outer sealing plate,finally weld the floor decking.

3. Before laying concrete metal decking ,the dirt on the top of the secondary beam must be cleaned to prevent moisture or water accumulation to ensure the quality of the stud welding in the next process.

4. When laying the floor slab, it should start from the starting line of the construction drawing and move along the installation position of the board to ensure the horizontal and vertical slabs after laying.

5,Please use the female ribs as the starting edge,and layout according to the layout diagram.The floor decking sheets is used from one end to the other, and the last piece is used as an adjustment plate because the width of the beam is different, but the sides need to be welded flat on the beam. If there is a difference value, the width of the circle is adjusted.

9. Inquiry contact details:

1. Considering fast reply,please call us by +86-592-6095031;

2. Considering expensive international call charges,please send us mail by admin@yumisteel.com .

People from Yumi steel will use our sincere smile, in exchange for customer satisfaction with our services.



Previous: 
Next: 

Facebook Messenge