Trapezoidal Standing Seam Corrugated Steel Panels
Product Description
Trapezoidal standing seam corrugated steel panels
1.Steel panel type :
Model NO. : | YX 70-470 |
Rib height : | 70 mm |
Rib distance : | N/A |
Modular width : | 470 mm |
Feeding width : | 600 mm |
Available thickness: | 0.15 - 0.75 mm |
Available length : | 20FT container: ≤ 5.95m |
Available material : | PPGI/ PPGL/ Aluminum sheets/ Al-Mg-Mn alloy metal sheets |
Coating type : | PE, PVDF, HDP, SMP, etc. |
Fasteners : | Concealed fastening system with floating clips. The clips are available as floating. Two different clip heights are available to allow for insulation |
2.Metal Roofing application :
This corrugated steel panels can be used as roofing,siding, Interior and suitable for the following areas:
☆ Areas prone to hail.
☆ Areas prone to high snow volume.
☆ Areas prone to high winds.
☆ Areas prone to extreme temperatures.
☆ Connect with Solar Panel mounting.
☆ For Rainwater Harvesting.
This steel panel can be field formed at site, depending on material length or architectural modeling.If it’s arch shapes needed,it’s better to make at site.
3.Steel roofing regular colors:
Above is our regular colors.If you have special color required,please advise,thank you.
4.Steel panel production video:
Here is the corrugated steel sheets production site video,warmly welcome to visit us to know more.
5.Corrugated roofing features:
☆ This metal panel penetration is eliminated over the entire building to avoid rain or water leaking;
☆ Exposed fasteners are 80% fewer than traditional side lap panels;
☆ Optional product and weathertightness warranties;
☆ Assures specifiers of minimal air infiltration and water penetration;
☆ Field installation is efficiency.